Quantcast

Building et-STM32

classic Classic list List threaded Threaded
6 messages Options
tobor tobor
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Building et-STM32

Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
BogdanM BogdanM
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Building et-STM32

Hi,

Could you try with the toolchain below instead?


Thanks,
Bogdan


On Wed, Nov 13, 2013 at 4:36 PM, Bill <[hidden email]> wrote:
Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
tobor tobor
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Building et-STM32

That is the toolchain I am using version 4_7-2013q3 precompiled.

thanks,


2,509 
last downloaded today



On Wed, Nov 13, 2013 at 8:55 AM, Bogdan Marinescu <[hidden email]> wrote:
Hi,

Could you try with the toolchain below instead?


Thanks,
Bogdan


On Wed, Nov 13, 2013 at 4:36 PM, Bill <[hidden email]> wrote:
Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
BogdanM BogdanM
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Building et-STM32

On Wed, Nov 13, 2013 at 5:04 PM, Bill <[hidden email]> wrote:
That is the toolchain I am using version 4_7-2013q3 precompiled.

I'm confused, I thought you said you built the toolchain yourself?

"I have built arm-none-eabi-gcc toolchain according to the instructions at site

 

thanks,


2,509 
last downloaded today



On Wed, Nov 13, 2013 at 8:55 AM, Bogdan Marinescu <[hidden email]> wrote:
Hi,

Could you try with the toolchain below instead?


Thanks,
Bogdan


On Wed, Nov 13, 2013 at 4:36 PM, Bill <[hidden email]> wrote:
Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
tobor tobor
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Building et-STM32

My mistake. I installed the precompiled image of the toolchain, not the source.


On Wed, Nov 13, 2013 at 9:30 AM, Bogdan Marinescu <[hidden email]> wrote:
On Wed, Nov 13, 2013 at 5:04 PM, Bill <[hidden email]> wrote:
That is the toolchain I am using version 4_7-2013q3 precompiled.

I'm confused, I thought you said you built the toolchain yourself?

"I have built arm-none-eabi-gcc toolchain according to the instructions at site

 

thanks,


2,509 
last downloaded today



On Wed, Nov 13, 2013 at 8:55 AM, Bogdan Marinescu <[hidden email]> wrote:
Hi,

Could you try with the toolchain below instead?


Thanks,
Bogdan


On Wed, Nov 13, 2013 at 4:36 PM, Bill <[hidden email]> wrote:
Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
tobor tobor
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Building et-STM32

My last message may have appeared it is now working, but the original issue happens with the precompiled toolchain described and I get the fault handler with a clean download of the latest git of elua.

sorry for the confusion.


On Wed, Nov 13, 2013 at 9:41 AM, Bill <[hidden email]> wrote:
My mistake. I installed the precompiled image of the toolchain, not the source.


On Wed, Nov 13, 2013 at 9:30 AM, Bogdan Marinescu <[hidden email]> wrote:
On Wed, Nov 13, 2013 at 5:04 PM, Bill <[hidden email]> wrote:
That is the toolchain I am using version 4_7-2013q3 precompiled.

I'm confused, I thought you said you built the toolchain yourself?

"I have built arm-none-eabi-gcc toolchain according to the instructions at site

 

thanks,


2,509 
last downloaded today



On Wed, Nov 13, 2013 at 8:55 AM, Bogdan Marinescu <[hidden email]> wrote:
Hi,

Could you try with the toolchain below instead?


Thanks,
Bogdan


On Wed, Nov 13, 2013 at 4:36 PM, Bill <[hidden email]> wrote:
Having problems building the ET-STM32 image. Everything started out with most recent downloads.

Building on debian
I have built arm-none-eabi-gcc toolchain according to the instructions at site

I did a new git from the github repository and did a build with the command
./build_elua.lua board=et-stm32

The build fails for luaopen_dummy in linit.c
I moved it up in the file so it can compile. 
This is the only file I edited.
I get some warnings, but a .elf is created.
I used arm-none-eabi-objcopy -O binary elua_lua_et-stm32.elf elua_elua_et-stm32.bin

Copied the bin to XP to run STM flash loader (works with precompiled binary on elua site)
After loading I get the following instead of a prompt:

[Hard fault handler]
R0 = 80335f8
R1 = 80000000
R2 = 80335f8
R3 = 8035800
R12 = 38
LR = 80004b1
PC = 80003b6
PSR = a1000000
BFAR = 10068df8
CFSR = 8200
HFSR = 40000000
DFSR = 0
AFSR = 0

Output from build:

/elua# ./build_elua.lua board=et-stm32
[CONFIG] Found board description file at boards/known/et-stm32.lua
[CONFIG] Board header file is unchanged.

*********************************
Compiling eLua ...
CPU:             STM32F103RE
Board:           et-stm32
Platform:       stm32
Allocator:       newlib
Boot Mode:       standard
Target:         lua
Toolchain:       codesourcery
ROMFS mode:     verbatim
Version:         v0.9-133-gc6b97d4
*********************************

[PHONY] #phony:romfs
Building ROM file system ...
Done, total size is 1 bytes
[COMPILE] .build/et-stm32/src__lua__linit.o
[COMPILE] .build/et-stm32/src__lua__ltm.o
[COMPILE] .build/et-stm32/src__lua__lapi.o
[COMPILE] .build/et-stm32/src__lua__lauxlib.o
[COMPILE] .build/et-stm32/src__lua__lgc.o
[COMPILE] .build/et-stm32/src__lua__ltable.o
[COMPILE] .build/et-stm32/src__lua__lmathlib.o
[COMPILE] .build/et-stm32/src__lua__lstrlib.o
[COMPILE] .build/et-stm32/src__lua__lstate.o
[COMPILE] .build/et-stm32/src__lua__lrotable.o
[COMPILE] .build/et-stm32/src__elua_mmc.o
[COMPILE] .build/et-stm32/src__elua_uip.o
[COMPILE] .build/et-stm32/src__elua_adc.o
[COMPILE] .build/et-stm32/src__common_uart.o
[COMPILE] .build/et-stm32/src__common.o
[COMPILE] .build/et-stm32/src__dlmalloc.o
[COMPILE] .build/et-stm32/src__main.o
[COMPILE] .build/et-stm32/src__buf.o
[COMPILE] .build/et-stm32/src__uip__uip_arp.o
[COMPILE] .build/et-stm32/src__uip__uip.o
[COMPILE] .build/et-stm32/src__uip__uiplib.o
[COMPILE] .build/et-stm32/src__uip__dhcpc.o
[COMPILE] .build/et-stm32/src__uip__psock.o
[COMPILE] .build/et-stm32/src__uip__resolv.o
[COMPILE] .build/et-stm32/src__uip__uip-neighbor.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_pwr.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__misc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_sdio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_can.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_gpio.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_usart.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_fsmc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_spi.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rtc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_tim.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_bkp.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dma.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_iwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_adc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_exti.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dac.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_i2c.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_rcc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_crc.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_wwdg.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_flash.o
[COMPILE] .build/et-stm32/src__platform__stm32__FWLib__library__src__stm32f10x_dbgmcu.o
[COMPILE] .build/et-stm32/src__platform__stm32__core_cm3.o
[COMPILE] .build/et-stm32/src__platform__stm32__system_stm32f10x.o
[ASM] .build/et-stm32/src__platform__stm32__startup_stm32f10x_hd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform.o
[COMPILE] .build/et-stm32/src__platform__stm32__stm32f10x_it.o
[COMPILE] .build/et-stm32/src__platform__stm32__lcd.o
src/platform/stm32/lcd.c: In function 'LCD_ClearLine':
src/platform/stm32/lcd.c:172:3: warning: pointer targets in passing argument 2 of 'LCD_DisplayStringLine' differ in signedness [-Wpointer-sign]
In file included from src/platform/stm32/lcd.c:19:0:
src/platform/stm32/lcd.h:180:6: note: expected 'u8 *' but argument is of type 'char *'
[COMPILE] .build/et-stm32/src__platform__stm32__lua_lcd.o
[COMPILE] .build/et-stm32/src__platform__stm32__platform_int.o
[COMPILE] .build/et-stm32/src__platform__stm32__enc.o
src/platform/stm32/enc.c: In function 'index_handler':
src/platform/stm32/enc.c:65:5: warning: statement with no effect [-Wunused-value]
src/platform/stm32/enc.c: In function 'enc_set_index_handler':
src/platform/stm32/enc.c:60:1: warning: control reaches end of non-void function [-Wreturn-type]
[ASM] .build/et-stm32/src__platform__cortex_utils.o
[COMPILE] .build/et-stm32/src__platform__arm_cortex_interrupts.o
[LINK] ./elua_lua_et-stm32.elf
[builder] Done building target.


thanks for any help
Bill


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev



_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Loading...