Quantcast

Binary for eLua on Arduino Due

classic Classic list List threaded Threaded
6 messages Options
scdr scdr
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Binary for eLua on Arduino Due


I put up a binary for eLua for the Arduino Due in this thread
http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/
 
Still very much a work in progress.  Has some debug code that will spit out a few extra messages (mostly in the interrupt handlers at the moment).
Let me know if you encounter any issues, or if parts not listed as tested actually do work.

The version in that thread is pretty close to the current version.
 
The source is on
https://github.com/ecdr/elua 
in the SAM branch.

Suggestions/contributions/etc. welcome.

Somebody e-mailed me asking about where to get eLua for the arduino due.  
Not sure if my messages to them got through, so thought I would post this to the list.
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
gduarte gduarte
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Binary for eLua on Arduino Due

Congrats man!



2014/1/20 <[hidden email]>

I put up a binary for eLua for the Arduino Due in this thread
http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/

Still very much a work in progress.  Has some debug code that will spit out a few extra messages (mostly in the interrupt handlers at the moment).
Let me know if you encounter any issues, or if parts not listed as tested actually do work.

The version in that thread is pretty close to the current version.

The source is on
https://github.com/ecdr/elua
in the SAM branch.

Suggestions/contributions/etc. welcome.

Somebody e-mailed me asking about where to get eLua for the arduino due.  
Not sure if my messages to them got through, so thought I would post this to the list.
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev



--
Gabriel Duarte
Linux User #471185
Rio de Janeiro / RJ
http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Georges Georges
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Binary for eLua on Arduino Due

Thanks for the link but i can not create a menber on this site.
Please send me the HEX file.

Thanks for all

Best regards

Georges



2014/1/21 Gabriel Duarte <[hidden email]>
Congrats man!



2014/1/20 <[hidden email]>


I put up a binary for eLua for the Arduino Due in this thread
http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/

Still very much a work in progress.  Has some debug code that will spit out a few extra messages (mostly in the interrupt handlers at the moment).
Let me know if you encounter any issues, or if parts not listed as tested actually do work.

The version in that thread is pretty close to the current version.

The source is on
https://github.com/ecdr/elua
in the SAM branch.

Suggestions/contributions/etc. welcome.

Somebody e-mailed me asking about where to get eLua for the arduino due.  
Not sure if my messages to them got through, so thought I would post this to the list.
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev



--
Gabriel Duarte
Linux User #471185
Rio de Janeiro / RJ
http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
gduarte gduarte
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Binary for eLua on Arduino Due

Just for knowledge,
did you reuse the original Arduino source code to write this port or simply wrote from scratch?

Cheers


2014/1/21 georges King <[hidden email]>
Thanks for the link but i can not create a menber on this site.
Please send me the HEX file.

Thanks for all

Best regards

Georges



2014/1/21 Gabriel Duarte <[hidden email]>
Congrats man!



2014/1/20 <[hidden email]>


I put up a binary for eLua for the Arduino Due in this thread
http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/

Still very much a work in progress.  Has some debug code that will spit out a few extra messages (mostly in the interrupt handlers at the moment).
Let me know if you encounter any issues, or if parts not listed as tested actually do work.

The version in that thread is pretty close to the current version.

The source is on
https://github.com/ecdr/elua
in the SAM branch.

Suggestions/contributions/etc. welcome.

Somebody e-mailed me asking about where to get eLua for the arduino due.  
Not sure if my messages to them got through, so thought I would post this to the list.
_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev



--
Gabriel Duarte
Linux User #471185
Rio de Janeiro / RJ
http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev



--
Gabriel Duarte
Linux User #471185
Rio de Janeiro / RJ
http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
scdr scdr
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Binary for eLua on Arduino Due

In reply to this post by scdr

The port uses the Atmel Software Framework (ASF) drivers.
As far as I can tell the Arduino seems to use an earlier version of the Atmel Software Framework as well.
(At least the base drivers are similar to the ASF.)

I used the Arduino source code as a reference (to figure out how some of the peripherals work).
Many features of the ASF drivers are poorly documented, or are not documented at all as far as I can tell.
I also temprorarily borrowed some of the Arduino code as starting point towards making the
eLua platform code (e.g. in adapting timers to work as PWMs).
I have tried to note in the code which modules are not working, and which bits are just placeholders/skeleton code
to be evolved into something cleaner/neater/working.


> ----- Original Message -----
> From: Gabriel Duarte
> Sent: 01/21/14 11:28 AM
> To: eLua Users and Development List (www.eluaproject.net)
> Subject: Re: [eLua-dev] Binary for eLua on Arduino Due
>
> Just for knowledge,
> did you reuse the original Arduino source code to write this port or simply
> wrote from scratch?
>
> Cheers
>
>
> 2014/1/21 georges King <[hidden email]>
>
> > Thanks for the link but i can not create a menber on this site.
> > Please send me the HEX file.
> >
> > Thanks for all
> >
> > Best regards
> >
> > Georges
> >
> >
> >
> > 2014/1/21 Gabriel Duarte <[hidden email]>
> >
> >> Congrats man!
> >>
> >>
> >>
> >> 2014/1/20 <[hidden email]>
> >>
> >>
> >>> I put up a binary for eLua for the Arduino Due in this thread
> >>> http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/
> >>>
> >>> Still very much a work in progress. Has some debug code that will spit
> >>> out a few extra messages (mostly in the interrupt handlers at the moment).
> >>> Let me know if you encounter any issues, or if parts not listed as
> >>> tested actually do work.
> >>>
> >>> The version in that thread is pretty close to the current version.
> >>>
> >>> The source is on
> >>> https://github.com/ecdr/elua
> >>> in the SAM branch.
> >>>
> >>> Suggestions/contributions/etc. welcome.
> >>>
> >>> Somebody e-mailed me asking about where to get eLua for the arduino due.
> >>>
> >>> Not sure if my messages to them got through, so thought I would post
> >>> this to the list.
> >>> _______________________________________________
> >>> eLua-dev mailing list
> >>> [hidden email]
> >>> https://lists.berlios.de/mailman/listinfo/elua-dev
> >>
> >>
> >>
> >>
> >> --
> >> Gabriel Duarte
> >> Linux User #471185
> >> Rio de Janeiro / RJ
> >> http://genericdev.wordpress.com/
> >>
> >> _______________________________________________
> >> eLua-dev mailing list
> >> [hidden email]
> >> https://lists.berlios.de/mailman/listinfo/elua-dev
> >>
> >
> >
> > _______________________________________________
> > eLua-dev mailing list
> > [hidden email]
> > https://lists.berlios.de/mailman/listinfo/elua-dev
> >
>
>
>
> --
> Gabriel Duarte
> Linux User #471185
> Rio de Janeiro / RJ
> http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Dado Sutter Dado Sutter
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Binary for eLua on Arduino Due

Thank you !
Can't wait to test it (and your Stelaris Launchpad port) on a kit!

Thanks a lot
Dado




On Tue, Jan 21, 2014 at 11:08 PM, FP AB <[hidden email]> wrote:

The port uses the Atmel Software Framework (ASF) drivers.
As far as I can tell the Arduino seems to use an earlier version of the Atmel Software Framework as well.
(At least the base drivers are similar to the ASF.)

I used the Arduino source code as a reference (to figure out how some of the peripherals work).
Many features of the ASF drivers are poorly documented, or are not documented at all as far as I can tell.
I also temprorarily borrowed some of the Arduino code as starting point towards making the
eLua platform code (e.g. in adapting timers to work as PWMs).
I have tried to note in the code which modules are not working, and which bits are just placeholders/skeleton code
to be evolved into something cleaner/neater/working.


> ----- Original Message -----
> From: Gabriel Duarte
> Sent: 01/21/14 11:28 AM
> To: eLua Users and Development List (www.eluaproject.net)
> Subject: Re: [eLua-dev] Binary for eLua on Arduino Due
>
> Just for knowledge,
> did you reuse the original Arduino source code to write this port or simply
> wrote from scratch?
>
> Cheers
>
>
> 2014/1/21 georges King <[hidden email]>
>
> > Thanks for the link but i can not create a menber on this site.
> > Please send me the HEX file.
> >
> > Thanks for all
> >
> > Best regards
> >
> > Georges
> >
> >
> >
> > 2014/1/21 Gabriel Duarte <[hidden email]>
> >
> >> Congrats man!
> >>
> >>
> >>
> >> 2014/1/20 <[hidden email]>
> >>
> >>
> >>> I put up a binary for eLua for the Arduino Due in this thread
> >>> http://forum.stellarisiti.com/topic/1770-elua-for-sam3-arduino-due/
> >>>
> >>> Still very much a work in progress. Has some debug code that will spit
> >>> out a few extra messages (mostly in the interrupt handlers at the moment).
> >>> Let me know if you encounter any issues, or if parts not listed as
> >>> tested actually do work.
> >>>
> >>> The version in that thread is pretty close to the current version.
> >>>
> >>> The source is on
> >>> https://github.com/ecdr/elua
> >>> in the SAM branch.
> >>>
> >>> Suggestions/contributions/etc. welcome.
> >>>
> >>> Somebody e-mailed me asking about where to get eLua for the arduino due.
> >>>
> >>> Not sure if my messages to them got through, so thought I would post
> >>> this to the list.
> >>> _______________________________________________
> >>> eLua-dev mailing list
> >>> [hidden email]
> >>> https://lists.berlios.de/mailman/listinfo/elua-dev
> >>
> >>
> >>
> >>
> >> --
> >> Gabriel Duarte
> >> Linux User #471185
> >> Rio de Janeiro / RJ
> >> http://genericdev.wordpress.com/
> >>
> >> _______________________________________________
> >> eLua-dev mailing list
> >> [hidden email]
> >> https://lists.berlios.de/mailman/listinfo/elua-dev
> >>
> >
> >
> > _______________________________________________
> > eLua-dev mailing list
> > [hidden email]
> > https://lists.berlios.de/mailman/listinfo/elua-dev
> >
>
>
>
> --
> Gabriel Duarte
> Linux User #471185
> Rio de Janeiro / RJ
> http://genericdev.wordpress.com/

_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev


_______________________________________________
eLua-dev mailing list
[hidden email]
https://lists.berlios.de/mailman/listinfo/elua-dev
Loading...